Top 9 Byrd Tool Shelix Cutterhead For Dewalt Planer DW735 OEM – Power Planer Knives

As an Amazon Associate I earn from qualifying purchases.

1. Byrd Tool


Byrd Tool OEM Shelix cutterhead for Dewalt planer DW735

Byrd Tool #ad - You will need to remove the inserts from the cutterhead prior to install, and then replace them after the cutterhead is in place.

Replace individual inserts when dull or damaged, rather than having to replace an entire expensive knife blade; comes with 5 replacement inserts. This dw735 oem cutterhead is machined slightly larger to give you a cutterhead that is the same size as the one you are removing. Made in the USA! Staggered, spiral carbide insert configuration provides a shear, rather than straight cut for a smoother finish and quieter operation. Helical insert knife configuration breaks up chips, making dust collection easier.
BrandByrd Tool #ad
ManufacturerByrd #ad
Height15.6 Inches
Part NumberDewalt P131519-1/B

2. Byrd Tool


Byrd Tool Shelix cutterhead for Dewalt planer DW735

Byrd Tool #ad - 088" roughly 1/16 in smaller than the original oem head to allow for installation without removing the carbide insertsC3 carbide cutters lasts an average of 10 times longer per side 4 sides = 40x than traditional steel knives. Cutterhead diameter is 0 Spiraled to break up chips for dust collection, shear to give clean cutting actionTrue helical cut slices the wood which greatly reduces noise and tearoutPocket for cutters makes replacing them easy and creates perfect alignment.
BrandByrd Tool #ad
ManufacturerByrd Tool #ad
Height15.6 Inches
Length3 Inches
Weight7 Pounds
Width4 Inches
Part NumberP131518/B
ModelDewalt DW-735



ELEPHAS, Woodworking Tool Spiral Cutter head and Helical cutterhead for Dewalt DW735 planer Original DW735-OEM

ELEPHAS #ad - Reduced noise and tear-out, produce much smoother finish on difficult woods. Including tool kit: 5 spare inserts/ 10 spare screws/ two T wrenches. This cutterhead is the original size. The indexable inserts allows you to rotate it if one knife edge is dull or nicked. The patented indexable 4 cutting-edge double-layer insert and screw make it much easier to mount the knives on the cutterhead. You will need to remove inserts from the cutterhead before installing on the machine. The two bearings 6204+6202 are already installed on the cutterhead.
BrandELEPHAS #ad
ManufacturerELEPHAS #ad
Height1.92 Inches
Length15.67 Inches
Width1.92 Inches
Part NumberDW735-OEM



Upgraded Helical Cutterhead for 13" DeWalt Planer DW735 DW735X Planer

TJATSE #ad - Upgraded cutterhead-the tjatse 13" helical cutterhead is designed to replace the straight knife cutterhead on the DeWalt DW735 and DW735X Planers. If an insert dulls or gets nicked, simply rotate it to expose a new sharp edge or easily replaced, No need to take out all the blades, reduces shop down-time and cost saving.

Brand quality warranty-package included 1 x 13” helical cutterhead; 56 x carbide inserts; 56 x screws, 1x screw driver, one-year warranty which assures the unit is free from factory defects. Long-term cost saving-56 indexable carbide inserts included to produce a superior finish. The tjatse customer service and Technical Support Teams are all days online for help. Takes the performance of your Dewalt planer to the next level and cuts smoothly through your wood planing projects with ease. Amazing noise reduction-the biggest difference of helical cutterhead is the noise reduction, then the chip removal is easier.

Energy saving and power saving, the section cutting process makes the wood chips very fine, while reducing tear out more effectively than conventional straight-knife cutterheads. Cut improvement-helical cutter head features smaller which contact the wood and an angle shearing the fibers rather than tearing at them, the cutting performance is excellent and the slight bit of snipe that was getting with the straight knives is completely gone, the wood surface would be so much smoother. Indexable carbide inserts are less prone to nicks and cracks over conventional HSS knives and 10 times longer than.
BrandTJATSE #ad
ManufacturerTJATSE #ad
Part NumberTS-HC4R-735

5. Dark stone


Dark stone DS12904 spiral cutterhead for Dewalt DW735 Planer 40 inserts

Dark stone #ad - Brand new 4 rows and 40 inserts. Reduced noise. Chip out is nearly non-existent with spiral shearing action. Improved dust collection. Outstanding finish compared to HSS straight knives. Extreme long life with 4-sided carbide insert knives that are easy to replace.
BrandDark stone #ad
ManufacturerDark stone #ad
Part NumberDS12904



WONENGDA Woodworking Tool Spiral Cutter Head and Helical Cutter Head for Dewalt Planer DW735-OEM

WONENGDA #ad - Unlike conventional single straight knives, you do not need to replace the knife if it becomes damaged or dull. Including tool kit: 5 spare carbide inserts/ 10 spare screws/ two T wrenches, 2rows with 30 carbide cutters.

When you compare to straight blade cutterheads - the cost of buying a second set of straight blades so you can get one set sharpened while the other is in the machine. You will only need to replace the inserts when four edges are dull, giving you more life than steel knives. You will need not to remove inserts from the cutterhead before installing on the machine. The two skf bearings 6204+6202 are already installed on the cutterhead. Instead, if one knife edge is damaged or needs sharpening simply turn it to another edge. Helical spiral heads require less horsepower, make smaller chips and operate with far less noise than other types of cutterheads.
ManufacturerWONENGDA #ad
Part NumberWND-W-2

7. Shop Fox


Shop Fox W1877 13" Portable Planer with Spiral-Style Cutterhead

Shop Fox #ad - Maximum stock thickness: 6 in. Maximum stock width: 13 in. X 33-1/4 in. Maximum cutting depth: 1/8 in. Cutterhead type: spiral-style with 26 inserts. Cutterhead speed: 10, 000 RPM. Adapter included. Motor: 2hp, single-phase, 120v, 15A. With 2-1/2 in. Table size with extensions: 13 in. Carbide insert size: 14mm x 14mm x 2mm. Feed rate: 26 FPM. Dust port size: 4 in.
BrandShop Fox #ad
ManufacturerWoodstock International #ad
Part NumberW1877
Warranty2 Year



Thickness Planer, 13-Inch, 3 Knife for Larger Cuts, DEWALT Planer, Two Speed 20,000 RPM Motor, Corded DW735

DEWALT #ad - Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI. Three knife cutter-head delivers 30-percent longer knife life and makes knife change faster and easier. Powerful 15-amp, 20, 000 rpm motor 10, 000 rpM cutterhead speed handles larger cuts in wider materials with ease. Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine.
BrandDEWALT #ad
ManufacturerDEWALT #ad
Height18.1 Inches
Length24 Inches
Weight45.36 Pounds
Width1 Inches
Part NumberDW735



Grizzly H9893 H7354-10 Pack, 15mmx15mmx2.5mm R100 4" Radius Carbide Inserts Cutters For Byrd Shelix Cutterheads For Dewalt DW735 DW735X

JTEX #ad - Package with -10 Pack Carbide Inserts Blades. 15mmx15mmx2. 5mm r100 4" radius carbide inserts cutters for byrd Shelix Cutterheads For Dewalt DW735 DW735X, Grizzly H9893 H7354. 4-cutting edge15mmx15mmx2. 5mm all are of the same sharpness. Made of solid tungsten carbide, providing you a better experience and durable use. Easy to replace your jointers and planers, excellent accessory for wood turning work. 15mm square straight carbide insert, Designed for numerous spiral/helical planer cutter head system, wood lathe Tools.
BrandJTEX #ad
ManufacturerJTEX #ad