Top 10 Raspberry Pi OLED – Single Board Computers

As an Amazon Associate I earn from qualifying purchases.

1. Weewooday

 #ad

5 Pieces 0.96 Inch OLED Module 12864 128x64 Driver IIC I2C Serial Self-Luminous Display Board Compatible with Arduino Raspberry PI White

#ad
Weewooday #ad - Embedded driver ic: communication: i2c/iic interface, only need 2 I/O ports; Compatible with MMDVM, Pi-Star, and it is compatible with Raspberry pi. About fonts: no embedded fonts inside the OLED controller, user can create the fonts through the font generation software.

Information: 128 x 64; view angle: more than 160 degree; support voltage: 3. 3v-5v dc; power consumption: 004w during normal operation, full screen lit 008w. Self-luminous design: needn't backlight, bright and crisp dots, the display can self-luminous; It has high contrast, even tiny fonts quite readable. Functional usages: 096 inch oled module for showing graphical and textual information directly on your micro-controller projects; It supports many chips: compatible with Arduino Mega, 51 MCU, Raspberry pi, STIM 32, etc.
BrandWeewooday #ad
ManufacturerWeewooday #ad
WarrantyThe brands or models we mentioned are only for expressing products adaptability explanation, not for trade mark using, our trade mark is Weewooday, kindly noted.

2. waveshare

 #ad

Waveshare 1.5inch RGB OLED Display Module, Compatible with Raspberry Pi Arduino STM32, SPI Interface, 128x128 Pixels Displaying 65K Colors

#ad
waveshare #ad - Supports 4-wire spi or 3-wire SPI interface, configured via onboard resistor. 128x128 high resolution, 65K colors, clearly displays colorful images. Ssd1351 oled. Comes with development resources and manual examples for Raspberry Pi/Arduino/STM32. Compatible with any Arduino project and is fairly simple to get setup and running.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Part Number1.5inch RGB OLED Module
Model1.5inch RGB OLED Module

3. DIYmall

 #ad

DIYmall 0.96 Inch Blue Yellow OLED Display Module I2C Serial 128x64 SSD1306 IIC Screen Board for Arduino Raspberry Pi 51 Msp420 STIM32 SCR Micro:bitPack of 2pcs

#ad
DIYmall #ad - What you will get is: 2 x 096inch oled blue&yellow, any question please feel free to contact us. How to use 2pcs oled display modules in the same time, pls check this vedio for reference: https://wwwdotyoutubedotcom/watch?v=yef23sJjiU0 The iic address can be changed, it is convenient to use with different machines; Four square holes are easy to install.

Compatible with mmdvm，Pi-Star, and it works with raspberry pi. The screen is made in taiwan, quality is much better. Document link:https://drivedotgoogledotcom/open?id=0b8dsgdar8_31UEItMmx6ZDJIOWs Datasheet link:https://drivedotgoogledotcom/open?id=16FdmMveOURZ_KeF_rOV_bWhavkiRB5WZ. Https://techdotscargilldotnet/ssd1306-with-python/.
BrandDIYmall #ad
ManufacturerDIYmall #ad
Height1.18 Inches
Length1.18 Inches
Weight0.02 Pounds
Width1.97 Inches
Part NumberFZ1113X2
ModelNA

4. Adafruit

 #ad

128x32 Monochrome OLED Add-on for Raspberry Pi, Adafruit 3527 PiOLED

#ad
Adafruit #ad - Works with any Raspberry Pi computer. Made of 128x32 individual white OLED pixels and because the display makes its own light, no backlight is required. Only the i2c pins so you have plenty of GPIO connections available for buttons, LEDs, sensors, etc. Nice and compact so it will fit into any case.
BrandAdafruit #ad
ManufacturerAdafruit #ad
Height1.57 Inches
Length4.33 Inches
Weight0.01 Pounds
Width1.97 Inches
Part Number3527

5. Frienda

 #ad

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module I2C OLED Screen Driver DC 3.3V~5V White Display Color

#ad
Frienda #ad - Power-saving display: the i2c oled display performs better than the traditional LCD display and with lower consumption the IIC I2C communications simplifies connections; Please note that these I2C OLED display module comes without pin headers.

Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, ESP32, compatible with Arduino, also compatible with ESP8266, STM32, etc. More details: use compatible with arduino, esp32, stm32, esp8266, etc.3. 35v power; operating temperature: -40 - 85 ℃; Resolution: 128 x 32. What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight. Product manual: as shown in the instructions.
BrandFrienda #ad
ManufacturerFrienda #ad
Part NumberFrienda-Display Module-v-5166

6. waveshare

 #ad

POE HAT B for Raspberry Pi 4B/3B+,Power Over Ethernet HAT with 0.91" OLED,Support 802.3af PoE Network,802.3af Power-Sourcing Equipment Required

#ad
waveshare #ad - Poe hat b for raspberry pi 4b/3b+, power over ethernet hat, support 802. 3af poe network, 802. 3af power-Sourcing Equipment Required.

Oled display coLOR:white. Oled driver:ssd1306. Oled pixels:128×32. Integrates pcf8574 io expander for i2c bus, providing pin P0 for directly fan control, and more spare IO pins. Network standard:802. 3af poe. Dimensions:56. 5 × 65mm. Poe power input:37v ~ 57v dc in. Oled size:091". 091" oled, allows auto running on powerup or programmable control, and fan status in real-time; Onboard cooling fan, IP address, for monitoring processor temperature, configured by switch. Poe power output:5V 2. 5a dc out.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Part NumberRaspberry Pi PoE HAT (B)
ModelRaspberry Pi PoE HAT (B)

7. waveshare

 #ad

Waveshare 1.3inch OLED Display HAT for Raspberry Pi 128x64 Pixels with Embedded Controller Communicating via SPI or I2C Interface.

#ad
waveshare #ad - Optional interfaces: 4-wire sPI, 3-wire SPI, I2C, configured via onboard resistor. 1x joystick 5-position, 3x pushbuttons, handy and useful. Standard raspberry pi 40pin gpio extension header, supports Raspberry Pi series boards, Jetson Nano.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Weight0.02 Pounds
Part Number1.3inch OLED HAT
ModelNA

8. waveshare

 #ad

Waveshare 1.5inch RGB OLED Display Module 128x128 Pixels 16-bit High Color 65K Colors with Embedded Controller Communicating via SPI Interface.

#ad
waveshare #ad - Comes with development resources and manual examples for Raspberry Pi/Jetson Nano/STM32. Display color: RGB, 65K colors. This is a general rgb oled display module, 128x128 pixels, with embedded controller, 1.5inch diagonal, 16-bit high color 65K colors, communicating via SPI interface. Supports 4-wire spi or 3-wire SPI interface, configured via onboard resistor. 128x128 high resolution, 65K colors, clearly displays colorful images.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Weight0.02 Pounds
Part Number1.5inch RGB OLED Module
Model1.5inch RGB OLED Module

9. waveshare

 #ad

1.5inch RGB OLED Display Module 128x128 16-bit High Color SPI Interface SSD1351 Driver Raspberry Pi/Jetson Nano Examples Provided

#ad
waveshare #ad - 128x128 high resolution, 65K colors, clearly displays colorful images. This is a general rgb oled display module, with embedded controller, 16-bit high color 65K colors, 1.5inch diagonal, 128x128 pixels, communicating via SPI interface. Supports 4-wire spi or 3-wire SPI interface, configured via onboard resistor.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Weight0.02 Pounds
Part Number1.5inch RGB OLED Module
Model1.5inch RGB OLED Module

10. DIYmall

 #ad

DIYmall PiOLED 0.91inch I2C 128X32 SSD1306 OLED Display Module for Raspberry Pi White x 1pc

#ad
DIYmall #ad - This oled is compatible with all raspberry pi, such as Pi 1/Pi2/Pi3/Pi zero, the display picture is for PiOLED with RPI 0W. Comes completely pre-assembled and tested so you don't need to do anything but plug it in and install our Python code. This mini screen uses the i2c pins so you have plenty of GPIO connections available for buttons, LEDs, sensors, etc. Document link https://githubdotcom/IOT-MCU/IIC-Pi-OLED/wiki. What you will get: 1pc pioled 091inch oled for raspberry Pi, any questions pls feel free to contact us.
BrandDIYmall #ad
ManufacturerDIYmall #ad
Height1.18 Inches
Length1.18 Inches
Weight0.03 Pounds
Width1.97 Inches
Part NumberFZ3579X2

Tags: