As an Amazon Associate I earn from qualifying purchases.
EZDIY-FAB #ad - Vertical gpu bracket with rgb led effects, g, b, mystic, synchronizable rgb lighting via motherboard aura, Fusion:Support M/B 3 pin RGB Header 5V, d, R, G, Please note : Not Support 4pin RGB header +12V, 12 volts can destroy LED.
Vertically display a gpu graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler. Note: please check your case with enough space.
MUSETEX #ad - More spacemusetex mk7 series has 4mm tempered door opening design and mesh front panel, make it easy and free to disassemble and install computer accessories, and allow maximum airflow to provide cooling for your power supply. Outstanding airflowlarge front panel metal mesh, there is still 38mm distance between gpu and the front glass panel after installing vertical graphics card, 1 pcs 200mm MUSETEX ARGB fan and 3 pcs 120mm MUSETEX ARGB fans are pre-installed for the case to provide lighting and excellent airflow at the same time, keep cooling with the case.
This widest case in all micro cases，the width of this case is 230mm, which will keep your system cooling.
Dust-proof designthe case is equipped with 2pcs dust filter, and the top magnetic strip dust filter protects the case ; other is PSU dust filter easy for install and cleaning on the bottom. Multiple argb modes button control has 19 lighting modes ;motherboard control: it connected to the 5V 3PIN header on motherboard, the motherboard control can be unlimited ARGB fans modes Note: 12V 4PIN motherboard is not suitable for motherboard control mode, it is recommended to use button control only. Motherboard compatability: micro-ATX/ Mini-ITX （Not for ATX motherboard）. Top i/o panel2 x usb3.
PHANTEKS THERMAL SOLUTIONS #ad - Pci-e gen4 x16 riser cable included with Dual layer induvial shielded cables. Compatible with 1-slot, 2-slot, 3-slot and 4-slot graphics cards. Vertical mounting system for any graphics card.
EZDIY-FAB #ad - Vertically display a gpu graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler. Designed for most atx case with at least 7 PCIE slots in the market.
Pcie riser with high quality tpe cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance.
BITFENIX #ad - Reinforced design with strengthened Handles, Durable Matte Coating, and 1mm Thick Metal. Rtx 3090 or rx6900xt ready – gpu clearance up to 339mm with both Horizontal and Vertical Mounting Options.
Phanteks #ad - Compatible: 7+ open PCI slots. Easy installation, placing tray over all seven PCI slot spaces. Modding might be required. Must change pci-e slot setting in bios to gen3/pci-e 3. 0 before installing the GPU to work with Gen4 / PCI-E 4.
nkomax #ad - All-aluminum metal material - provides strong and long-lasting support. Tool-free fixing module - The support module is equipped with a cushioning anti-scratch pad and a base high-gloss process.
The workmanship of the detail process - the small graphics card support frame is made of three complex processes: polished anode, sandblasted anode and CNC high-speed edge-washing high-gloss process.
Bottom hidden magnet design - The magnet hidden in the base is designed for easy installation and more stable standing in the chassis. Screw adjustment design - the graphics card bracket design can be compatible with various chassis configurations of traditional, MATX, ITX and long power supply bays to meet various user hosts.
EZDIY-FAB #ad - Please test the riser cable onto the gpu first before installing the GPU to vertical bracket mount. Please refer to length spec image and confirm that there is enough space of your chassis.
Supports most 1, 2, and 3 slot graphic cards. High quality material increases structural toughness and supports the large graphics card weight on the market. New designed bracket to vertically show off gpu. Supports pcie 4.
Cooler Master #ad - Durable, high quality materials: thick SGCC steel prevents the largest and heaviest GPUs from bending the GPU holder. Modular, instantly adjustable design: the position of the GPU can move back and forth to allow cables to pass through chassis with either closed or open PCI slots.
Cooler master riser cable version 2 included: A high quality Cooler Master version 2 riser cable completes the vertical GPU holder package.
AVERZELLA #ad - And the support modules are equipped with anti-slip mats to better protect your graphics card. Provides strong and long-lasting support. Its body is made by three processes: CNC high precision engraving, polished anodizing and sandblasted anodizing.
Tool-free fixing module Installation can be completed in under a minute without any tools. Bottom hidden magnet design the magnet hidden in the base is designed for easy installation and more stable standing in the chassis.
1. EZDIY-FAB
#adEZDIY-FAB Vertical Graphics Card Holder Bracket with ARGB 5V 3Pin LED,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- Black
#adVertically display a gpu graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler. Note: please check your case with enough space.
More information #ad
With movable bracket, more flexible in using PC case interior space. Designed for most atx case with at least 7 PCIE slots in the market. Only supports PCIE 3. 0 The 20cm/7. 8in pcie riser with high quality tpe cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance.| Brand | EZDIY-FAB #ad |
| Manufacturer | EZDIY-FAB #ad |
| Part Number | US-3528 RGB GPU Bracket-B-with new riser |
| Model | US-3528 RGB GPU Bracket-B-with new riser |
More information #ad
2. MUSETEX
#adMUSETEX MATX Micro-ATX Tower 3PCS 120MM ARGB Fans + 1x 200MM ARGB Fan Pre-Installed 2 PCS × USB 3.0 Ports Opening Tempered Glass Panel & Mesh Front Airflow Micro-ATX Gaming PC Case White,MK7-WN4
#adThis widest case in all micro cases，the width of this case is 230mm, which will keep your system cooling.
More information #ad
The internal space is wide and easy to install 3 x 2. 5" ssd ；2 x 3. 5" hdd；micro atx/itx motherboard; 120mm/240mm/280mm water cooling; maximum length 340mm GPU（installing vertically or horizontally）; maximum length 180mm CPU air cooling; maximum length 200mm PSU. Dust-proof designthe case is equipped with 2pcs dust filter, and the top magnetic strip dust filter protects the case ; other is PSU dust filter easy for install and cleaning on the bottom. Multiple argb modes button control has 19 lighting modes ;motherboard control: it connected to the 5V 3PIN header on motherboard, the motherboard control can be unlimited ARGB fans modes Note: 12V 4PIN motherboard is not suitable for motherboard control mode, it is recommended to use button control only. Motherboard compatability: micro-ATX/ Mini-ITX （Not for ATX motherboard）. Top i/o panel2 x usb3.
| Brand | MUSETEX #ad |
| Manufacturer | MUSETEX #ad |
| Height | 9 Inches |
| Length | 16.54 Inches |
| Width | 15.35 Inches |
| Part Number | MK7-WN4 |
| Model | MK7-WN4 |
| Warranty | 10 years warranty |
More information #ad
3. PHANTEKS THERMAL SOLUTIONS
#adPhanteks PH-VGPUKT4.0_03 Gen4 Vertical GPU Bracket, 220mm Flat Line PCI-E Gen4 x16 Riser Cable Kit
#adMore information #ad
7 pci slot atx chassis required. Rubber pads included to support graphics card weight to prevent GPU sag. Premium and durable cable design supporting full Gen4 speeds. Can be directly installed without modding in the Phanteks Eclipse P300A/P360A/P400A chassis.| Brand | PHANTEKS THERMAL SOLUTIONS #ad |
| Manufacturer | Phanteks #ad |
| Part Number | PH-VGPUKT4.0_03 |
| Model | PH-VGPUKT4.0_03 |
| Warranty | 1 year manufacturer |
More information #ad
4. EZDIY-FAB
#adEZDIY-FAB Vertical Graphics Card Holder Bracket,GPU Mount,Video Card VGA Support Kit with 20cm/7.8in PCIE 3.0 Riser Cable
#adPcie riser with high quality tpe cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance.
More information #ad
High quality material increases structural toughness and supports the large graphics card weight on the market. Only supports PCIE 3. 0 Please refer to length spec image and confirm that there is enough space inside the chassis. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape.| Brand | EZDIY-FAB #ad |
| Manufacturer | EZDIY-FAB #ad |
| Part Number | US-GPU Vertical holder-B with new riser |
| Model | US-GPU Vertical holder-B with new riser |
More information #ad
5. BITFENIX
#adUSB 3.2 Type-C Port, Vertical GPU and Water Cooling Mounting, BitFenix Prodigy M 2022 mATX/Mini-ITX Gaming PC Case, RTX 3090 or RX 6900 XT Ready, 3 ARGB Fans Included, White, Tempered Glass
#adMore information #ad
3x 120mm argb fans and 2x argb led included and Conveniently Customizable with SE Controller and SE Remote. High air flow with a pre-installed 6010 Fan Blowing Directly To GPU and a Mesh Front Panel. Easy access with usb 3. 2 gen 2 type-c connection, as well as 2xUSB 3. 0 type-A.| Brand | BITFENIX #ad |
| Manufacturer | BITFENIX #ad |
| Height | 33.46 Inches |
| Length | 23.62 Inches |
| Weight | 4.41 Pounds |
| Width | 23.62 Inches |
| Part Number | 4712883217746 |
| Model | 4712883217746 |
More information #ad
6. Phanteks
#adPhanteks PH-VGPUKT_02 – Universal Vertical GPU Bracket with 220mm Flat Line Pci-E X16 Riser Cable Kit
#adMore information #ad
0 gpus. Compatible with chassis with “open” PCI slot design. Gpu support: Dual Slot GPU. Pci slot required: 7. Supports PCIE3. 0/2. 0/1. 0 . Material: Powder Coated Steel. Vertically display a VGA Graphics card. Included 220mm riser cable.| Brand | Phanteks #ad |
| Manufacturer | Phanteks #ad |
| Height | 6.5 Inches |
| Length | 9.5 Inches |
| Weight | 0.95 Pounds |
| Width | 6.5 Inches |
| Part Number | PH-VGPUKT_02 |
| Model | PH-VGPUKT_02 |
| Warranty | 2 year manufacturer |
More information #ad
7. nkomax
#adGraphics Card GPU Brace Support, GPU Stand, Video Card Sag Holder Bracket
#adThe workmanship of the detail process - the small graphics card support frame is made of three complex processes: polished anode, sandblasted anode and CNC high-speed edge-washing high-gloss process.
More information #ad
This is made of all-aluminum metal instead of plastic, can avoid the aging of plastic materials and can be used as a long-term replacement. The full anode process can maintain the durability. Bottom hidden magnet design - The magnet hidden in the base is designed for easy installation and more stable standing in the chassis. Screw adjustment design - the graphics card bracket design can be compatible with various chassis configurations of traditional, MATX, ITX and long power supply bays to meet various user hosts.
| Brand | nkomax #ad |
| Manufacturer | nkomax #ad |
| Part Number | SSZJ-S |
| Model | SSZJ-S |
| Warranty | 1 year |
More information #ad
8. EZDIY-FAB
#adEZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- Black
#adSupports most 1, 2, and 3 slot graphic cards. High quality material increases structural toughness and supports the large graphics card weight on the market. New designed bracket to vertically show off gpu. Supports pcie 4.
More information #ad
0/3. 0/2. 0/1. 0, rx6900xt, compatible with rtx3090, rtx3080, RTX3070, rtx3060ti, RX6800. Thanks to stretchable structure design, dp cable to your GPU without hassle, you would be able to connect HDMI, compatible to PC chassis with PCI grilles. Designed for most full/mid ATX tower with at least 7 available PCI slots. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape.| Brand | EZDIY-FAB #ad |
| Manufacturer | EZDIY-FAB #ad |
| Part Number | YIHPI333 |
| Model | SG-4.0CM GPU-B |
More information #ad
9. Cooler Master
#adCompatible with All Standard ATX Chassis MCA-U000R-KFVK01, Cooler Master Master Accessory Vertical Graphics Card Holder Kit Version 2 with Premium Riser Cable PCI-E 3.0 x16-165mm
#adCooler master riser cable version 2 included: A high quality Cooler Master version 2 riser cable completes the vertical GPU holder package.
More information #ad
Compatible with all standard atx chassis: The newly revised vertical graphics card holder kit fits all standard ATX chassis with at least 7 available PCI slots. Showcase your graphics card: the vertical graphics card holder Kit allows vertical installation of a GPU to better show off the visual design of the GPU and its cooler.| Brand | Cooler Master #ad |
| Manufacturer | Coolermaster #ad |
| Height | 4.76 Inches |
| Length | 7.24 Inches |
| Weight | 1.26 Pounds |
| Width | 5.59 Inches |
| Part Number | MCA-U000R-KFVK01 |
| Model | MCA-U000R-KFVK01 |
| Warranty | 1 Year |
More information #ad
10. AVERZELLA
#adUniversal VGA Graphics Card Holder, GPU Stand, Video Card Sag Holder Bracket, AVERZELLA Graphics Card GPU Mini Brace Support
#adTool-free fixing module Installation can be completed in under a minute without any tools. Bottom hidden magnet design the magnet hidden in the base is designed for easy installation and more stable standing in the chassis.
More information #ad
Screw adjustment design the graphics card bracket design can be compatible with various chassis configurations of traditional, MATX, ITX and long power supply bays to meet various user hosts. Small but beautiful this graphics card stand is simple, compact and does not take up space. Aluminum metal material It is made of aluminum metal instead of plastic, rustproof.| Brand | AVERZELLA #ad |
| Manufacturer | AVERZELLA #ad |
| Model | AVE-ZJ-S |
| Warranty | 2 years |
More information #ad
