Top 10 KBS Rust Seal – Automotive Paints & Primers

As an Amazon Associate I earn from qualifying purchases.

1. KBS Coatings

#ad

1 Quart, Proven Rust Prevention, Covers 50 sq ft, KBS Coatings 4401 Gloss Black RustSeal

#adKBS Coatings #ad - Rustseal is ideal for a brush, roll or spray application. Rustseal is a waterproof coating strengthened by repeated exposure to moisture. Flash point: 12. 22 degrees_celsius. Rustseal has superior flow and leveling properties. Rustseal will withstands temps up to 600°F 316°C and RustSeal is VOC compliant.

Rustseal has high abrasion and chemical resistance make it ideal for thousands of applications. Rustseal will not crack, most acids & alkalis, chip, oils, flake or peel. Rustseal repels fuels, and graffiti. The brush marks flow out and the surface looks like it has been powder coated. Rustseal is much more durable than powder coating. Rustseal forms permanent non-porous barrier against moisture and oxygen. Rustseal applications includes chassis, support beams, pipe work, garage floors, boat chain lockers, boat bilges, springs, fiberglass repair, roof drains, Fenders, Appliances, Engines, Fuel & waste-water treatment tanks, Hand rails, Air conditioning repair, Steam pipes, rebar coating, Boat fuel tanks, Trunks, Wheel wells, Frame, boat engine rooms, Boat hulls, boat heat exchangers, Boat masts, Floor pans, Steel roof, Suspension parts, boat pumps, Car Doors, lawn equipment, Comcrete Sealing, Boat decks, Boat boat trailers, Axles, Heavy Transport, Lead-based paint encapsulation and so much more.

Brand	KBS Coatings #ad
Manufacturer	KBS Coatings #ad
Height	4.6 Inches
Length	4.2 Inches
Width	4.2 Inches
Part Number	4401
Model	4401
Warranty	Quite simply, if one follows application instructions & applies proper mil thickness, and you don’t believe our products perform just as well if not better than the products you are currently using, we will refund your product purchase.

2. KBS Coatings

#ad

KBS Coatings 50010 Safety Blue System Sampler 3 Step System, KBS Klean 8oz., Rust Seal 8oz., Rust Blast 8oz.

#adKBS Coatings #ad - Rustseal is highly surface tolerant and capable of adhering to almost any prepared substrate. This non-porous, flexible coating is incredibly tough and extremely resistant to abrasion and impact. The kbs system sampler kit contains everything you need to clean, prep, & apply two coats of RustSeal on up to a 12. 5 square foot area. Rustseal is a paint-like substance. Rustseal acts as a total rust inhibitor and preventive. Widest array of 10 non-porous color formulas. Excellent surface penetration and adhesion | Total Package for Rust Prevention.

Brand	KBS Coatings #ad
Manufacturer	KBS Coatings #ad
Height	3.2 Inches
Length	8.1 Inches
Weight	2.25 Pounds
Width	6.3 Inches
Part Number	50010
Model	50010

3. KBS Coatings

#ad

Covers 100 sq ft, KBS Coatings 5710202 Satin Black Large Frame Coater Kit

#adKBS Coatings #ad - Convenient kit - comes with Everything You Need! Forms permanent non-porous barrier against moisture and oxygen. Insanely durable - High abrasion and chemical resistance. Includes directions to make sure you get the jon done right. Easy to use - Apply directly over treated rust.

Brand	KBS Coatings #ad
Manufacturer	KBS Coatings #ad
Height	12 Inches
Length	12 Inches
Width	12 Inches
Part Number	5710202
Model	5710202

4. KBS Coatings

#ad

Seals Up to 5 Gallon Tank, KBS Coatings 52000 Cycle Tank Sealer Kit, Complete Kit

#adKBS Coatings #ad - Permanently seals pinholes & weld seams. The kbs cycle tank sealer kit contains everything needed to seal a tank of up to 5 gallons. Flash point: 400 degrees_celsius. Once cured, impervious to all modern day fuels, alcohol additives & most solvents. Includes kbs klean, Rust Blast and Tank Sealer.

Brand	KBS Coatings #ad
Manufacturer	KBS Coatings #ad
Height	10.7 Inches
Length	7 Inches
Weight	0.5 Pounds
Width	6.3 Inches
Part Number	52000
Model	52000
Warranty	Quite simply, if one follows application instructions & applies proper mil thickness, and you don’t believe our products perform just as well if not better than the products you are currently using, we will refund your product purchase.

5. KBS Coatings

#ad

KBS Coatings 57001 Gloss Black Frame Coater Kit, Prep and Coats an Entire Car or Truck Frame

#adKBS Coatings #ad - Rustseal has high temperature resistance, up to 600F. Rustseal can be brushed, rolled or sprayed. Area with 2 coats of paint coverage. Rustseal is a waterproof coating strengthened by repeated exposure to moisture.

It repels fuels, oils, most acids & alkalis, and graffiti!. The frame coater kit is our quart size 3-step system kit that includes enough products to Klean, Blast & Seal a full-size car or truck frame, or any 50 sq. This kit is easy to apply and produces a finish that has high abrasion resistance and chemical resistance. Ft. This kit includes kbs klean, Brushes, tank Sealer, RustBlast, Gloves and Complete Directions. When brushed on, the brush marks flow out to a beautiful finish that looks like powder coating but it much more durable than powder coating.

Brand	KBS Coatings #ad
Manufacturer	KBS Coatings #ad
Height	10.7 Inches
Length	8.4 Inches
Weight	0 Pounds
Width	8.3 Inches
Part Number	57001
Model	57001
Warranty	Quite simply, if one follows application instructions and applies proper total dry film mil thickness, and you don’t believe our products perform just as well if not better than the products you are currently using, we will refund your product purchase.

6. KBS Coatings

#ad

Seals Up to 12 Gallon Tank, KBS Coatings 52050 Large Cycle Tank Sealer Kit

#adKBS Coatings #ad - The kbs large cycle tank sealer kit contains everything needed to seal a tank of up to 12 gallons. The tank sealer is flexible and able to expand and contract with your tank. It is an all inclusive kit! this kit includes kbs klean, RustBlast, Tank Sealer, Gloves and Complete Directions. This kit eliminates all rust and corrosion meaning no clogged fuel filters. The tank sealer permanently seals pinholes & weld seams and is Impervious to all fuels, alcohol additives and most solvents.

Brand	KBS Coatings #ad
Manufacturer	KBS Coatings #ad
Part Number	52050
Model	52050
Warranty	Quite simply, if one follows application instructions and applies proper total dry film mil thickness, and you don’t believe our products perform just as well if not better than the products you are currently using, we will refund your product purchase.

7. KBS Coatings

#ad

KBS Coatings 53000 Auto Fuel Tank Sealer Kit, Seals Up to 25 Gallon Tank

#adKBS Coatings #ad - The tank sealer is flexible and able to expand and contract with your tank. The tank sealer permanently seals pinholes & weld seams and is Impervious to all fuels, alcohol additives and most solvents. This kit eliminates all rust and corrosion meaning no clogged fuel filters. It is an all inclusive kit! this kit includes kbs klean, Tank Sealer, RustBlast, Gloves and Complete Directions. The kbs auto fuel tank sealer kit contains everything needed to seal a tank of up to 25 gallons.

Brand	KBS Coatings #ad
Manufacturer	KBS Coatings #ad
Height	8.2 Inches
Length	10.5 Inches
Weight	9.22 Pounds
Width	8.4 Inches
Part Number	53000
Model	53000
Warranty	Quite simply, if one follows application instructions and applies proper total dry film mil thickness, and you don’t believe our products perform just as well if not better than the products you are currently using, we will refund your product purchase.

8. KBS Coatings

#ad

Preps and Coats Entire Car or Truck Frame Complete Kit, KBS Coatings 5750201 Satin Black/Gloss Black All-In-One Chassis Paint Kit

#adKBS Coatings #ad - Brush roll or Spray Application. Will not crack, Flake or Peel. Excellent Adhesion. Provides a uV stable surface that is highly durable. Complete All-Inclusive Kit.

Brand	KBS Coatings #ad
Manufacturer	KBS Coatings #ad
Height	8.3 Inches
Length	10.6 Inches
Weight	9.75 Pounds
Width	8.4 Inches
Part Number	5750201
Model	5750201

9. KBS Coatings

#ad

KBS Coatings 57202 Satin Black Ultimate Frame Coater Kit

#adKBS Coatings #ad - Rust seal featured superior flow out making a brushed surface look like it has been sprayed. The ultimate frame coater kit comes with everything you need: kbs clean Quart, Brushes, Cavity Coater Aerosol, Nitrile Gloves, Rust Blast Quart, Rust Seal Gloss Black Quart, Cavity Wand, Stir Stick.

Rust seal can be brushed, rolled or sprayed. Rust seal is a waterproof coating that is strengthened by repeated exposure to moisture. The ultimate frame coater kit is designed to give you want you need to stop rust from the inside out. Rust seal also repels fuels, most acids and alkalis, oils, and graffiti!. Rust seal on the outside and Cavity Coater on the inside. Rust seal is highly abrasion and chemical resistant.

Brand	KBS Coatings #ad
Manufacturer	KBS Coatings #ad
Height	12 Inches
Length	9 Inches
Width	9 Inches
Part Number	57202
Model	57202

10. KBS Coatings

#ad

16 fl oz., KBS Coatings 75101 Cavity Coater and Wand

#adKBS Coatings #ad - Use cavity coater with a kbs cavity wand to give long lasting protection for those hard to reach enclosed cavities such as rocker panels, inside doors And fenders, boxed frames, deck lids, tailgates.

And more. Resists alkaline solutions, steam, road salt, most chemical and acid vapors, salt water. Kbs cavity coater is the Perfect Solution for hard to reach areas that are prone to rusting. Salt spray insane Rust Protection! Cavity coater provides a self healing film which renders over 4000+ hrs. Creeps into welds and seams. Salt spray protection meaning Insane Rust Protection. Over 4 times the protection of conventional cavity waxes. 4000+ hrs. Wicks and penetrates where primers and topcoats cannot! .

Brand	KBS Coatings #ad
Manufacturer	KBS Coatings #ad
Height	3.4 Inches
Length	8.2 Inches
Weight	1.45 Pounds
Width	5.7 Inches
Part Number	75101
Model	75101
Warranty	Quite simply, if one follows application instructions & applies proper mil thickness, and you don’t believe our products perform just as well if not better than the products you are currently using, we will refund your product purchase.