Top 10 Arduino Nano 33 IoT – Single Board Computers

Top 10 Arduino Nano 33 IoT – Single Board Computers

As an Amazon Associate I earn from qualifying purchases.

1. Arduino

#ad

Arduino Nano 33 IoT ABX00027

#ad
Arduino #ad - Pre-certified module with external processor ensures maintaining RF compliance when writing application code. Run directly from high voltages from lead or multi-cell Lithium-ion batteries providing 3.

3v power supply to peripherals at significant output current. Arm cortex-m0+ microcontroller and a pre-certified ESP32-based WiFi and Bluetooth module from u-blox. The ease of use of a nano board with the addition of secure IoT and BT connectivity. Small 45mm x 18mm, robust and powerful board; 3. 3v variant of the Nano family. On-board dc-dc power supply enables the board to be powered up to 21V maintaining high efficiency and offering a lot of current to external devices without overheating.

Two 15 pins connectors one on each side that are pin to pin compatible with the original Arduino Nano. Clock up to 48mhz, secure wifi and bluetooth connectivity with a 6-axis imu, flash 256kb, SRAM 32KB, ECC608A crypto chip provides IoT security.
BrandArduino #ad
ManufacturerArduino #ad
Height1.77 Inches
Length0.39 Inches
Weight0.04 Pounds
Width0.71 Inches
Part NumberABX00027
ModelABX00027

2. Arduino

#ad

Arduino Nano 33 IoT with Headers ABX00032

#ad
Arduino #ad - Pre-certified module with external processor ensures maintaining RF compliance when writing application code. Run directly from high voltages from lead or multi-cell Lithium-ion batteries providing 3.

3v power supply to peripherals at significant output current. On-board dc-dc power supply enables the board to be powered up to 21V maintaining high efficiency and offering a lot of current to external devices without overheating. Clock up to 48mhz, flash 256kb, sram 32kb, secure wifi and bluetooth connectivity with a 6-axis imu, ECC608A crypto chip provides IoT security.

Small 48mm x 18mm, robust and powerful board; 3. 3v variant of the Nano family. Arm cortex-m0+ microcontroller and a pre-certified ESP32-based WiFi and Bluetooth module from u-blox. Two 15 pins connectors one on each side that are pin to pin compatible with the original Arduino Nano. The ease of use of a nano board with the addition of secure IoT and BT connectivity.
BrandArduino #ad
ManufacturerArduino #ad
Height1.77 Inches
Length0.39 Inches
Weight0.01 Pounds
Width0.71 Inches
Part NumberABX00032
ModelABX00032

3. Arduino

#ad

Arduino Nano 33 BLE with Headers ABX00034

#ad
Arduino #ad - Two 15 pin connectors - one on each side of the board. Designed for short range BT interactions and power savvy projects. The board’s architecture is fully compatible with arduino IDE Online and Offline with dedicated libraries; it has a 9 axis Inertial Measurement Unit IMU and a reduced power consumption compared to other same size boards. Clock 64mhz, flask 1mb, ram 256kb. Small 48mm x 18mm and robust board is built around the NINA B306 module, based on Nordic nRF 52840 and containing a powerful Cortex M4F.
BrandArduino #ad
ManufacturerArduino #ad
Height1.18 Inches
Length3.07 Inches
Weight0.05 Pounds
Width2.4 Inches
Part NumberABX00034
ModelTIFC00125

4. Arduino

#ad

Arduino Nano 33 BLE ABX00030

#ad
Arduino #ad - Two 15 pin connectors - one on each side of the board. The board’s architecture is fully compatible with Arduino IDE Online and Offline it has a 9 axis Inertial Measurement Unit IMU and a reduced power consumption compared to other same size boards. Designed for short range BT interactions and power savvy projects. Clock 64mhz, flask 1mb, rAM 256KB. Small 48mm x 18mm and robust board is built around the NINA B306 module, based on Nordic nRF 52840 and containing a powerful Cortex M4F.
BrandArduino #ad
ManufacturerArduino #ad
Height1.97 Inches
Length1.18 Inches
Weight0.04 Pounds
Width2.76 Inches
Part NumberABX00030
ModelABX00030

5. Arduino

#ad

Arduino Nano 33 BLE Sense ABX00031

#ad
Arduino #ad - Clock 64mhz, flask 1mb, rAM 256KB. Small 48mm x 18mm, powerful, Bluetooth connected and with all the sensors you may need to design innovative applications.

Built around the nina b306 module for ble and bluetooth 5 communication; the module is based on Nordic nRF 52840 processor that contains a powerful Cortex M4F. Two 15 pin connectors - one on each side of the board. The board’s architecture is fully compatible with arduino ide Online and Offline; it has a 9 axis Inertial Measurement Unit IMU, light, temperature, color and gesture sensors, humidity, pressure, plus a microphone that are managed through specialised Arduino libraries.
BrandArduino #ad
ManufacturerArduino #ad
Height0.79 Inches
Length1.77 Inches
Weight0.04 Pounds
Width0.71 Inches
Part NumberABX00031
ModelABX00031

6. seeed studio

#ad

Desiged for Projects Need Arduino Micro,3 pcs, Seeeduino XIAO The Smallest Arduino Microcontroller Based on SAMD21,with Rich Interfaces, 100% Arduino IDE Compatible

#ad
seeed studio #ad - Rich interfaces in a tiny size there is 14 gpio pins, which can be used for 11 analog PINs, 11 digital pins, 1 uart interface, 1 i2c interface, and 1 SPI interface in such a tiny size - only 20mm*17.5mm as small as your thumb. There are power pads at the back of the XIAO which support battery and make it designed for wearable devices to become realistic.

Powerful cpu seeeduino xiao carries powerful cpu arm cortex-m0+ 32bit 48mhz microcontroller samd21g18, which is three times than Arduino Uno and Arduino Nano. In addition, this arduino ide compatible board Xiao is also equipped with 256KB flash memory and 32KB SRAM. As it has a 2. 54mm pin pitch, it is an Arduino microcontroller that can be used even when inserted into a breadboard. Perfect for wearable and tiny arduino projects on the other hand, this little board has good performance in processing but needs less power.

Usb type c support seeeduino xiao supports the usb type-c interface which can supply power and download code. As a matter of fact, it is designed in a tiny size and can be used for Arduino wearable devices and small projects. Seeeduino xiao development board is the smallest Arduino compatible board in the Seeeduino series. Fully compatible with arduino ide the seeeduino xiao development board is perfectly compatible with Arduino IDE, you can easily develop some small projects with the help of the large and comprehensive Arduino library.
Brandseeed studio #ad
Manufacturerseeed studio #ad
Part Number110010004

7. REXQualis

#ad

Compatible with Arduino Nano V3.0 Nano x 3 with 3 Cable, 3pcs Nano Board CH340 / ATmega328P with USB Cable, REXQualis Nano V3.0

#ad
REXQualis #ad - Rexqualis nano v3. 0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system. The nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27.

The power source is automatically selected to the highest voltage source. Rexqualis nano is a smallest, complete, and breadboard friendly board. It has everything that diecimila/Duemilanove has electrically with more analog input pins and onboard +5V AREF jumper. Rexqualis nano is using atmel atmega328p-au mcu, support ISP download and USB download, Power via the Mini-B USB.
BrandREXQualis #ad
ManufacturerREXQualis #ad
Part NumberRQ-NANO-01

8. LAFVIN

#ad

Nano Board ATmega328P 5V 16M Micro-Controller Board Compatible with Arduino IDE Nano x 3 with USB Cable, Nano V3.0

#ad
LAFVIN #ad - Lafvin nano ch340 controller is a compact board similar to the R3 board, smaller and breadboard-friendly than Diecimila. Lafvin nano v3. 0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system. Using atmel atmega328p-au mcu, support ISP download; Support USB download and Power. Improved new version CH340G Replace FT232RL. Works the same as original Nano, runs perfectly on programming software. Original atmega328p ch340 chip is used.
BrandLAFVIN #ad
ManufacturerLAFVIN #ad
Weight0.01 Pounds
Part NumberLA-020
Model8541582500

9. ELEGOO

#ad

Compatible with Arduino Nano V3.0 Nano x 3 Without Cable, ELEGOO Nano Board CH340/ATmega+328P Without USB Cable

#ad
ELEGOO #ad - It's got a pin layout that works well with the Mini or the Basic Stamp TX, GND on one top, ATN, RX, power and ground on the other. Nano's got the breadboard-ability of the boarduino and the mini+usb with smaller footprint than either, so users have more breadboard space.

It is a smallest, complete, and breadboard friendly board. The power source is automatically selected to the highest voltage source. Use the driver from above link. The nano is using the chips atmega+328p and cH340, not FT232 as official Arduino, so pls. The nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27. It has everything that diecimila/Duemilanove has electrically with more analog input pins and onboard +5V AREF jumper.
BrandELEGOO #ad
ManufacturerELEGOO #ad
Height0.7 Inches
Length1.9 Inches
Weight0.01 Pounds
Width0.4 Inches
Part NumberEL-CB-005
ModelEL-CB-005

10. Elgato

#ad

Elgato Stream Deck, Live Content Creation Controller with 15 Customizable LCD Keys, Adjustable Stand, for Windows 10 and macOS 10.13 or Late 10GAA9901

#ad
Elgato #ad - Easy setup: simply drag and drop actions onto keys in the app. Fully customizable: Personalize keys with custom icons or choose from hundreds. Unlimited control: Nest folders within folders to store as many actions as you want. Direct integration: control game capture, TipeeeStream, Mixer, YouTube, Twitch, XSplit, OBS, and more.15 lcd keys: tap to switch scenes, launch media, adjust audio and more.
BrandElgato #ad
ManufacturerElgato Direct #ad
Height3.3 Inches
Length4.6 Inches
Weight0.4 Pounds
Width0.8 Inches
Part Number10GAA9901
Model10GAA9901
Warranty1 Year Limited Warranty