Lemoy 1/4″ Quick Connect Water Purifiers Tube Fittings for RO Water Reverse Osmosis System(Ball Valve+Y+L+I+T Type)+5 meters(15 feet) tubing hose pipe(blue) for RO Water Reverse Osmosis System blue

Lemoy 1/4″ Quick Connect Water Purifiers Tube Fittings for RO Water Reverse Osmosis System(Ball Valve+Y+L+I+T Type)+5 meters(15 feet) tubing hose pipe(blue) for RO Water Reverse Osmosis System blue


Lemoy - Designed for use with the Stealth Reverse Osmosis Systems. Prolong the service life of RO membrane. Push fit fittings, fit all water filter systems and RO system. Material: Polyethylene Plastic.

More information about Lemoy

Malida Water Pressure Gauge Stainless For Aquarium Meter 0-1.6MPa 0-220psi Reverse Osmosis System Pump With 1/4


Malida - Stainless pressure Gauge 220 PSI with fitting. Using a pressure gauge with your reverse osmosis system can be a great addition to your system as most problems that occur with reverse osmosis systems can relate to your water pressure. The water filter men pressure Gauge for Aquarium RO Reverse Osmosis System with 1/4.

Used a lot on the water pipe prior to your reverse osmosis system / aquarium ro / other. Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems. Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems.

Malida Water Pressure Gauge Stainless For Aquarium Meter 0-1.6MPa 0-220psi Reverse Osmosis System Pump With 1/4 - Pressure gauge pack includes: 1 x pressure gauge with ¼" male connection 1 x ¼" female to ¼" push fit 1 x ¼" Stem to ¼" push fit to ¼" push fit T Pressure gauge with fittings for quickfit connection to 1/4" 6mm Water Pipe.

More information about Malida


Similar products



HM Digital DM-1 In-Line Dual TDS Monitor, 0-9990 ppm Range, +/- 2% Readout Accuracy


HM Digital, Inc. 716186 - For any type of system that removes tds, you can install the 'IN' sensor on your tap water before the system and the 'OUT' sensor on your product water after your filtration system to determine the filter/membrane's effective operating rejection rate. Stainless pressure Gauge 220 PSI with fitting. Used a lot on the water pipe prior to your reverse osmosis system / aquarium ro / other.

Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems. It's very useful for coolers or under-the-sink systems. The in-line dual tds meter displays TDS levels of the feed water and product water with in and out electrode probes. Auto-off function conserves battery power.

HM Digital DM-1 In-Line Dual TDS Monitor, 0-9990 ppm Range, +/- 2% Readout Accuracy - Product description: how pure is your water? hM Digital's DM-1 is a dual inline monitor that measures TDS from 0 to 9990 ppm. Highly efficient and accurate due to its advanced microprocessor technology. The unit shuts off automatically after 10 minutes of non-use. The water filter men pressure Gauge for Aquarium RO Reverse Osmosis System with 1/4.

It includes batteries, two sensors and two 1/4" quick-connect T-fittings. Installs quickly and easily.

More information about HM Digital, Inc. 716186


Similar products



cck cck-2 Malida Size 1/4 Inch, 10 Meters 30 feet Length Tubing Hose Pipe for RO Water Filter System blue


cck cck-2 - The water filter men pressure Gauge for Aquarium RO Reverse Osmosis System with 1/4. Used a lot on the water pipe prior to your reverse osmosis system / aquarium ro / other. Highly efficient and accurate due to its advanced microprocessor technology. Non-toxic ingredients, Odorless and tasteless. Polyethelyne tubing for reverse osmosis and drinking water applicationsSize: 1/4 inch Length: 32 feettubing for reverse osmosis and drinking water applications.

Fits all water filter systemsnon-toxic ingredients, Odorless and tastelessblue Pressure gauge with fittings for quickfit connection to 1/4" 6mm Water Pipe. 1/4 inch supply Tube, blue. Stainless pressure Gauge 220 PSI with fitting. Size: 1/4 inch, length: 32 feet 10meters. Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems.

cck cck-2 Malida Size 1/4 Inch, 10 Meters 30 feet Length Tubing Hose Pipe for RO Water Filter System blue - . Flexible, easy to cut. Auto-off function conserves battery power. This tds monitor is highly efficient and accurate due to its advanced microprocessor technology. The dm-1 helps you to measure the tap water coming in vs the purified water going out of your water filtration system at any time. The in-line dual tds meter displays TDS levels of the feed water and product water with in and out electrode probes.

More information about cck cck-2


Similar products



RO System 2x 3/4" Garden / Laundry hose adapter Quick push-in connect with 1/4" RO Tube


Pure Water Club PT-Q34Ax2 - The dm-1 helps you to measure the tap water coming in vs the purified water going out of your water filtration system at any time. The unit shuts off automatically after 10 minutes of non-use. This tds monitor is highly efficient and accurate due to its advanced microprocessor technology. Auto-off function conserves battery power.

017 in. Non-toxic ingredients, Odorless and tasteless. This item include: 2x hose adapter 2x washer O ring 2x locking C rong Installation : apply appropriate teflon tape on the thread of hose bib end. Flexible, easy to cut. Installs quickly and easily. Use for cold water only. I. D. Polyethylene tubing, not good for other soft tubing.

RO System 2x 3/4" Garden / Laundry hose adapter Quick push-in connect with 1/4" RO Tube - Size: 1/4 inch, length: 32 feet 10meters. Place washer o ring in the adapter then screw onto the hose bib do not overthighten, it may interupt ro tube insert fully Working water pressures : maximum 120 PSI temperatures:70°F-150°F If you need more information, it may break the adapter Insert RO tube and lock with C-ring to ensure RO tube will not blow out after water turn on do not pre-install the C ring on the adapter before RO tube insert, please email to ask.

No tool require, just screw onto your garden hose bib to provide water source for your RO system. The in-line dual tds meter displays TDS levels of the feed water and product water with in and out electrode probes.

More information about Pure Water Club PT-Q34Ax2


Similar products



HydroLogic HLFV4 Float Valve, 1/4"


Hydro-Logic 728912 - Use for cold water only. Non-toxic ingredients, Odorless and tasteless. Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems. No tool require, just screw onto your garden hose bib to provide water source for your RO system. 3/4" standard size fit for reqular Garden / Laundry hose bib.

Works with Active Aqua Hydrologic water filtration systems. The dm-1 helps you to measure the tap water coming in vs the purified water going out of your water filtration system at any time. 1/4 inch supply Tube, blue. Highly efficient and accurate due to its advanced microprocessor technology. Achieve optimal water levels with the Hydro-Logic float valve.

HydroLogic HLFV4 Float Valve, 1/4" - Flexible, easy to cut. Float valve 1/4", works to maintain proper water levels in your Active Aqua Hydro-Logic water filtration system. Installs quickly and easily. The in-line dual tds meter displays TDS levels of the feed water and product water with in and out electrode probes. Auto-off function conserves battery power.

This tds monitor is highly efficient and accurate due to its advanced microprocessor technology.

More information about Hydro-Logic 728912


Similar products



PureSec 2018 CV1414 mini white plastic quick fitting straight inline check valve for tubing OD 1/4" used for RO system refrigerator ice maker coffee machinePack of 5


Jeamsworld - Suitable for use in hot and cold water applications. Fits all water purifiers systems. This little valve fits standard tubing od 1/4 inch copper, pex and PVC tubing for most RO systems Where to use it ? Applications include RO system, CPVC, beverage dispensing, refrigerator ice maker, coffee machine etc.

The water filter men pressure Gauge for Aquarium RO Reverse Osmosis System with 1/4. Stainless pressure Gauge 220 PSI with fitting. Applications include RO system beverage dispensing refrigerator ice maker coffee machine etc. Fits tubing od 1/4" on most RO system. The unit shuts off automatically after 10 minutes of non-use.

PureSec 2018 CV1414 mini white plastic quick fitting straight inline check valve for tubing OD 1/4" used for RO system refrigerator ice maker coffee machinePack of 5 - Auto-off function conserves battery power. Use for cold water only. Achieve optimal water levels with the Hydro-Logic float valve. Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems. 3/4" standard size fit for reqular Garden / Laundry hose bib. Installs quickly and easily.

Highly efficient and accurate due to its advanced microprocessor technology.

More information about Jeamsworld


Similar products



Malida 1/4" Tube Float Valve Kit for RO Water Reverse Osmosis System water filter Push to Connect Pipe Hose Tube Fittings


Malida - Minimum operating pressure: 40 PSI, Maximum Operating Pressure: 80 PSI. The water filter men pressure Gauge for Aquarium RO Reverse Osmosis System with 1/4. Fits all water purifiers systems. 1/4 inch supply Tube, blue. Flexible, easy to cut. Installs quickly and easily. Works with Active Aqua Hydrologic water filtration systems.

100% bpa free, 100% leak free, 100% Re-useable. The aquatic life float Valve Kit allows you to fill large tanks, containers and aquariums automatically. Applications include RO system beverage dispensing refrigerator ice maker coffee machine etc. No tool require, just screw onto your garden hose bib to provide water source for your RO system.

Malida 1/4" Tube Float Valve Kit for RO Water Reverse Osmosis System water filter Push to Connect Pipe Hose Tube Fittings - Easily plumb ro/di systems and more with flexible Polyethylene tubing and Automatic Shut-off Float Valves. Suitable for use in hot and cold water applications. If you are using this with a reverse osmosis or rO/DI system, as this kit includes the necessary auto shut-off valve, you WILL NOT need any other components, check valve and tubing.

Stainless pressure Gauge 220 PSI with fitting. Use for cold water only. The unit shuts off automatically after 10 minutes of non-use.

More information about Malida


Similar products



FS-TFC Reverse Osmosis Membrane Housing 1812/2012 with 1/4" Quick-Connect Fittings for Ro Menbrane 50/75/100/150 GPD -White


Whirlping HY-50RO membrane housing - Non-toxic ingredients, Odorless and tasteless. Connect and disconnect quick and easy without any other tools. The aquatic life float Valve Kit allows you to fill large tanks; containers; and aquariums automatic. Auto-off function conserves battery power. Minimum operating pressure: 40 PSI, Maximum Operating Pressure: 80 PSI.

Pressure gauge with fittings for quickfit connection to 1/4" 6mm Water Pipe. Adjust as needed. Flexible, easy to cut. Contains: 3 meters tubing, pvc ball float 1 pcs, manual ball valve 1 pcs, all around valve 1pcs, One check valve 1 pcs. Ro water reverse osmosis System water filter Push to Connect Pipe Hose Tube Fittings.

FS-TFC Reverse Osmosis Membrane Housing 1812/2012 with 1/4" Quick-Connect Fittings for Ro Menbrane 50/75/100/150 GPD -White - 100% bpa free, 100% leak free, 100% Re-useable. Standard size 2. 0 inch reverse osmosis Membrane Housing with 1/4" Quick-Connect Fittings. Fits tubing od 1/4" on most RO system. Universal compatiable for 2. 0 inch residential membrane housing on Most standard RO Systems Fits 1812 /2012 membranes50-150GPD. Applications include RO system beverage dispensing refrigerator ice maker coffee machine etc.

Installs quickly and easily.

More information about Whirlping HY-50RO membrane housing


Similar products



Drain Saddle Valve with 1/4" Quick Connect for Reverse Osmosis Ro Systems


AFWFilters DSV-150-14QC black - Fits on drain pipes up to 1. 5" in diameter. Adjust as needed. Auto-off function conserves battery power. Use for cold water only. Standard size 2. 0 inch reverse osmosis Membrane Housing with 1/4" Quick-Connect Fittings. 3/4" standard size fit for reqular Garden / Laundry hose bib. Stainless pressure Gauge 220 PSI with fitting.

This tds monitor is highly efficient and accurate due to its advanced microprocessor technology. Contains: 3 meters tubing, all around valve 1pcs, pvc ball float 1 pcs, manual ball valve 1 pcs, One check valve 1 pcs. Ro water reverse osmosis System water filter Push to Connect Pipe Hose Tube Fittings. The dm-1 helps you to measure the tap water coming in vs the purified water going out of your water filtration system at any time.

Drain Saddle Valve with 1/4" Quick Connect for Reverse Osmosis Ro Systems - Minimum operating pressure: 40 PSI, Maximum Operating Pressure: 80 PSI. Non-toxic ingredients, Odorless and tasteless. It will fit on pipes up to 1. 5-inch in diameter and has a 1/4-inch quick-connect fitting to connect to standard 1/4-inch poly tubingMore InfoThe drain saddle valve is affixed to a drain line on a sink, or similar plumbing, to allow the waste water from reverse osmosis systems to drain.

Made to fit on drain line between trap and sink basin. Fits tubing od 1/4" on most RO system.

More information about AFWFilters DSV-150-14QC black


Similar products



Malida Equal Straight OD Tube Ball Valve Quick Connect Fitting 1/4-Inch by 1/4-Inch OD Valve Start RO Water System Set Of 5


Malida 0009 - Adjust as needed. Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems. Package Quantity:5 pack. Drinks dispense and water filtration system fittings. The dm-1 helps you to measure the tap water coming in vs the purified water going out of your water filtration system at any time.

The aquatic life float Valve Kit allows you to fill large tanks; containers; and aquariums automatic. No tool require, just screw onto your garden hose bib to provide water source for your RO system. Universal compatiable for 2. 0 inch residential membrane housing on Most standard RO Systems Fits 1812 /2012 membranes50-150GPD.

Malida Equal Straight OD Tube Ball Valve Quick Connect Fitting 1/4-Inch by 1/4-Inch OD Valve Start RO Water System Set Of 5 - 1/4 inch supply Tube, blue. Stronger membrane cup design to prevent cracking. 30 bar pressure standable. The in-line dual tds meter displays TDS levels of the feed water and product water with in and out electrode probes. Auto-off function conserves battery power. Standard size 2. 0 inch reverse osmosis Membrane Housing with 1/4" Quick-Connect Fittings.

Used a lot on the water pipe prior to your reverse osmosis system / aquarium ro / other.

More information about Malida 0009


Similar products