16 OZ. SPOUT TOP – TAP MAGIC 10016E EP-XTRAOZ ONE FRIENDLY CUTTING FLUIDS

16 OZ. SPOUT TOP – TAP MAGIC 10016E EP-XTRAOZ ONE FRIENDLY CUTTING FLUIDS

#ad
#ad
Tap Magic #ad - Spout top made in USA. Tap magic 10016e ep-xtraoz one friendly cutting fluids - 16 OZ. Highly effective for drilling, tapping, milling - all cuts on all metals. This is the fluid to have when you don't know what cut or what metal tomorrow may bring. Tap magic with ep-xtra Cutting Fluid. Bottle. 16 oz.

More information about Tap Magic #ad

Tap Magic 20016A Aluminum Fluid with Spout Top, 16 oz, Light Yellow Pack of 1

#ad
#ad
ORS-Nasco Industrial 20016A #ad - Tap Magic 20016A Aluminum Fluid with Spout Top, 16 oz, Light Yellow Pack of 1 #ad - Tap magic aluminum Cutting Fluid is an efficient choice for any work on aluminum. Precision is always excellent and the finish is always superb. Ozone-friendly and completely free of 1, 1, 1 trichloroethane. Yields a beautiful micro-fine finish. Dissipates heat rapidly and provides closer tolerances. Also highly effective on magnesium and other nonferrous metals.

Highly compelling for drilling, tapping and milling that cuts on all metals. Unlike some other fluids on soft metals, it will not stain the surface of the work. Use for any and all cutting operations on aluminum.

More information about ORS-Nasco Industrial 20016A #ad


Similar products



Anytime Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SET

#ad
#ad
Anytime Tools AT200536 #ad - Top quality M2 HSS. Also highly effective on magnesium and other nonferrous metals. Use for any and all cutting operations on aluminum. Top quality m2 hss drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes in stock. Yields a beautiful micro-fine finish. Ozone-friendly and completely free of 1, 1, 1 trichloroethane.

Anytime Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SET #ad - Sizes 1, 4 and 5, 2, 3, 60° tip angles. Sizes 1, 4 and 5, 3, 2, 60° tip angles. Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes. Dissipates heat rapidly and provides closer tolerances.

More information about Anytime Tools AT200536 #ad


Similar products



Lubrication Maintenance KIT for MILLING Machine Expedited DELIVERY NOT Available

#ad
#ad
HIGH QUALITY TOOLS #ad - Yields a beautiful micro-fine finish. Sizes 1, 3, 4 and 5, 2, 60° tip angles. Also highly effective on magnesium and other nonferrous metals. Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes. Lubrication kit for milling machines: includes one pint each of vactra #2 way oil, and dte 26 hydraulic oil, velociTE #10 SPINDLE OIL, PLUS ONE 1.

Lubrication Maintenance KIT for MILLING Machine Expedited DELIVERY NOT Available #ad - 75 oz tube of lubriplate white grease expedited delivery not available use for any and all cutting operations on aluminum. Top quality M2 HSS. Ozone-friendly and completely free of 1, 1, 1 trichloroethane. Dissipates heat rapidly and provides closer tolerances.

More information about HIGH QUALITY TOOLS #ad


Similar products



Machinist's Thin Parallel Bar Set - 10 Pair 1/8" X 6"

#ad
#ad
TFT Tools #ad - Yields a beautiful micro-fine finish. Dissipates heat rapidly and provides closer tolerances. Ozone-friendly and completely free of 1, 1, 1 trichloroethane. Thin parallel set 1/8" 10 Pair 00003" steel use for any and all cutting operations on aluminum. Each parallel is 1/8" thick x 6" long with 2 holes. Top quality M2 HSS.

Includes 10 pairs of the following heights: 1/2", 1-1/8", 1-3/8", 5/8", 7/8", 1", 1-1/4", 3/4", 1-1/2" & 1-5/8". Made from high quality tool steel- stress relieved against distortion, precision ground and hardened Parallel and accurate within +/-. 0002" and made from high quality tool steel- stress relieved against distortion, precision ground and hardened.

Machinist's Thin Parallel Bar Set - 10 Pair 1/8" X 6" #ad - Sizes 1, 3, 4 and 5, 2, 60° tip angles. Our part # all-54100 Also highly effective on magnesium and other nonferrous metals. Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes.

More information about TFT Tools #ad


Similar products



Brown & Sharpe 599-792-30 Adjustable Spring Tensioned Tap Guide

#ad
#ad
Hexagon Metrology 599-792-30 #ad - Sizes 1, 2, 3, 4 and 5, 60° tip angles. Our part # all-541001/2" body diameter. Top quality M2 HSS. The brown & sharpe 599-792-30 adjustable spring-tensioned tap guide is used with a tap to thread holes in machining operations. Dissipates heat rapidly and provides closer tolerances. The company, is headquartered in North Kingstown, founded in 1833, RI.

What's in the box?tap guidePlastic storage case Use for any and all cutting operations on aluminum. Ozone-friendly and completely free of 1, 1, 1 trichloroethane. Reversible for male and female hole centering. Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes.

Brown & Sharpe 599-792-30 Adjustable Spring Tensioned Tap Guide #ad - The tap guide aligns the tap with the center of the hole and maintains the tap at a right angle to the hole. Includes 10 pairs of the following heights: 1/2", 7/8", 1-3/8", 1", 5/8", 3/4", 1-1/4", 1-1/8", 1-1/2" & 1-5/8". Made from high quality tool steel- stress relieved against distortion, precision ground and hardened Parallel and accurate within +/-.

0002" and made from high quality tool steel- stress relieved against distortion, precision ground and hardened. The tap guide is reversible for use with male and female hole centering. The tap includes a black plastic case.

More information about Hexagon Metrology 599-792-30 #ad


Similar products



Mitutoyo 050103, Edge/Center Finder, 3/8" Diameter Shank, 0.200" Diameter Tip

#ad
#ad
Mitutoyo 50103 #ad - Tap guide aligns tap with the center of the hole and maintains the tap at a right angle. Adjustable spring-tensioned tap guide is used with a tap to thread holes in machining operations. All working surfaces are hardened and ground. Includes 10 pairs of the following heights: 1/2", 1-3/8", 3/4", 5/8", 7/8", 1-1/4", 1-1/8", 1", 1-1/2" & 1-5/8".

Made from high quality tool steel- stress relieved against distortion, precision ground and hardened Parallel and accurate within +/-. 0002" and made from high quality tool steel- stress relieved against distortion, precision ground and hardened. Ozone-friendly and completely free of 1, 1, 1 trichloroethane.

Mitutoyo 050103, Edge/Center Finder, 3/8" Diameter Shank, 0.200" Diameter Tip #ad - Reversible for male and female hole centering. Yields a beautiful micro-fine finish. Use for any and all cutting operations on aluminum. Case-hardened steel with knurled body for durability and secure handling. 1/2" body diameter. Each parallel is 1/8" thick x 6" long with 2 holes. Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes.

Mitutoyo edge/center Finder with 3/8" Shank Diameter, 0200" tip diameter, and cone-shaped center finder.

More information about Mitutoyo 50103 #ad


Similar products



Mobil 100772 Vactra No.2 Way Oil 1 gal

#ad
#ad
Mobil 100772 #ad - 1/2" body diameter. Includes 10 pairs of the following heights: 1/2", 7/8", 5/8", 1", 3/4", 1-1/8", 1-3/8", 1-1/4", 1-1/2" & 1-5/8". Made from high quality tool steel- stress relieved against distortion, precision ground and hardened Parallel and accurate within +/-. 0002" and made from high quality tool steel- stress relieved against distortion, precision ground and hardened.

Tap guide aligns tap with the center of the hole and maintains the tap at a right angle. Also highly effective on magnesium and other nonferrous metals. Case-hardened steel with knurled body for durability and secure handling. Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes.

Mobil 100772 Vactra No.2 Way Oil 1 gal #ad - Use for any and all cutting operations on aluminum. Yields a beautiful micro-fine finish. Sizes 1, 4 and 5, 3, 2, 60° tip angles. Our part # all-54100 All working surfaces are hardened and ground. Dissipates heat rapidly and provides closer tolerances. Helps eliminate chatter and stick-slip of slides and ways.

More information about Mobil 100772 #ad


Similar products



VACTRA OIL NO.2, 1 GALLON 128OZ

#ad
#ad
MOBIL #ad - Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line. Helps reduce wear and keeps sliding surfaces smooth, lubricated and clean. Sizes 1, 3, 4 and 5, 2, 60° tip angles. Our part # all-54100 Includes 10 pairs of the following heights: 1/2", 5/8", 1-3/8", 1-1/8", 3/4", 7/8", 1-1/4", 1", 1-1/2" & 1-5/8".

Made from high quality tool steel- stress relieved against distortion, precision ground and hardened Parallel and accurate within +/-. 0002" and made from high quality tool steel- stress relieved against distortion, precision ground and hardened. Dissipates heat rapidly and provides closer tolerances. Great to lubricate machine ways.

VACTRA OIL NO.2, 1 GALLON 128OZ #ad - Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes. Yields a beautiful micro-fine finish. Used in a milling machine to find the workpiece edge. Reversible for male and female hole centering. Improves finish and quality of parts. Ozone-friendly and completely free of 1, 1, 1 trichloroethane.

More information about MOBIL #ad


Similar products



Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap 4oz

#ad
#ad
Birchwood Casey 80300 #ad - Itw professional Brands is headquartered in Olathe, KS. Can also be used on other surfaces to reveal defects or pinholes, or view gear tooth contact pattern. Used in a milling machine to find the workpiece edge. Provides a thin film without cracking or chipping and dries in minutes for convenience. Each parallel is 1/8" thick x 6" long with 2 holes.

Sizes 1, 4 and 5, 2, 3, 60° tip angles. Our part # all-54100 Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line. Top quality M2 HSS. 1/2" body diameter. Of fluid. It provides a thin film without cracking or chipping and dries in minutes for convenience. Vactra oil #2.

Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap 4oz #ad - Includes 10 pairs of the following heights: 1/2", 3/4", 5/8", 1-1/8", 7/8", 1-3/8", 1", 1-1/4", 1-1/2" & 1-5/8". Made from high quality tool steel- stress relieved against distortion, precision ground and hardened Parallel and accurate within +/-. 0002" and made from high quality tool steel- stress relieved against distortion, precision ground and hardened.

Reversible for male and female hole centering. Great to lubricate machine ways.

More information about Birchwood Casey 80300 #ad


Similar products



AUTOTOOLHOME 1/8" 3/16" 1/4" 5/16" 3/8" 1/2"high Speed Steel HSS 4 Flute Straight End Mill Cutter Set of 6

#ad
#ad
JYC International Trade Co., Ltd. ZH0095 #ad - Product name : end Mill;Material : HSS. Color : gray;cutting diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2". Improves finish and quality of parts. Yields a beautiful micro-fine finish. Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line. Top quality M2 HSS. Of fluid.

Adjustable spring-tensioned tap guide is used with a tap to thread holes in machining operations. Also highly effective on magnesium and other nonferrous metals. Great to lubricate machine ways. 1/2" body diameter. Each parallel is 1/8" thick x 6" long with 2 holes. Suit for: hardness of metal for above 30 degrees, exclusive to HIGH HARDNESS, with high bending resistance and abrasion resistance, HIGH SPEED CUTTING applications.

AUTOTOOLHOME 1/8" 3/16" 1/4" 5/16" 3/8" 1/2"high Speed Steel HSS 4 Flute Straight End Mill Cutter Set of 6 #ad - End mill bits are suitable for side milling, tool steel, aluminum, die steel, cast iron, etc. Apply to wood, alloy steel, tool steel, steel, stainless steel, cast iron, die steel, aluminum, titanium, carbon steel, etc. Tap guide aligns tap with the center of the hole and maintains the tap at a right angle.

Sizes 1, 2, 3, 4 and 5, 60° tip angles. Our part # all-54100

More information about JYC International Trade Co., Ltd. ZH0095 #ad


Similar products